The template will be centered on the top of the lower bumpers. Please check which version of the Mod Sliding shower you are installing. The date on the front of the installation guide will confirm. For the 10mm, 2018 version the proper installation is on pages 9 through 13, steps 1 through 10. For the 6mm with glazing 2019 version, the proper installation is on pages 9 through 13, steps 1 through 10. For the 6mm without glazing 2018 version, the proper installation is on pages 9 through 13, steps 1 through 10.
Related FAQs
-
Contemporary Pivot: Where can I find the hardware to install my Semi-Frameless Contemporary Pivot Door?
-
Classic500/EverEdge Shower Door: What do I do if the inside rollers are loose and easily pop out of the top track?
-
Classic500/EverEdge Shower Door: What height does the top track install at for my Classic500/EverEdge shower system?
-
Ashmore Shower Door: Are the side seals supposed to stay on my Ashmore Shower Door?
-
Commix Shower Door: The Fixed Panel Support screw is too short on the Commix shower door.
-
Traditional Sliding Shower: Why are the back of the handles and/or rollers hitting when the doors try to bypass?
-
Traditional Sliding Shower: Why is the outer door on my Traditional Shower Door hard to open?
-
Mod Sliding Shower: What do I do if the template for the Mod door goes up above my enclosure?
-
Contemporary Sliding Shower: Where do I install the bottom track for my Contemporary Sliding Shower or Tub Door?
-
Contemporary Pivot: I can’t get the clamps on my Contemporary Pivot Door. What do I do?
-
Contemporary Pivot: Why will my door not close on my Contemporary Pivot Door?
-
Contemporary Pivot: Why is water leaking under the glass door panel for my Contemporary Pivot Door?
-
Contemporary Pivot: Why is there water leaking under the bottom track or bottom pivot bracket for my Contemporary Pivot Door?
NEED MORE HELP?
CONTACT SUPPORT.