The track should be installed wall to wall behind the side jambs. The track should not be installed from side jamb to side jamb. Please check which version of the Contemporary Sliding Shower door you are installing. The date on the front of your installation guide will confirm, or you may review the rollers to determine. For version 2016, the proper installation is located on pages 17 through 21, steps 13 through 21. For version 2020, the proper installation is located on pages 16 through 20, steps 13 through 20.
Related FAQs
-
Contemporary Pivot: Where can I find the hardware to install my Semi-Frameless Contemporary Pivot Door?
-
Classic500/EverEdge Shower Door: What do I do if the inside rollers are loose and easily pop out of the top track?
-
Classic500/EverEdge Shower Door: What height does the top track install at for my Classic500/EverEdge shower system?
-
Ashmore Shower Door: Are the side seals supposed to stay on my Ashmore Shower Door?
-
Commix Shower Door: The Fixed Panel Support screw is too short on the Commix shower door.
-
Traditional Sliding Shower: Why are the back of the handles and/or rollers hitting when the doors try to bypass?
-
Traditional Sliding Shower: Why is the outer door on my Traditional Shower Door hard to open?
-
Mod Sliding Shower: Where do I place the template for the Mod shower door?
-
Mod Sliding Shower: What do I do if the template for the Mod door goes up above my enclosure?
-
Contemporary Pivot: I can’t get the clamps on my Contemporary Pivot Door. What do I do?
-
Contemporary Pivot: Why will my door not close on my Contemporary Pivot Door?
-
Contemporary Pivot: Why is water leaking under the glass door panel for my Contemporary Pivot Door?
-
Contemporary Pivot: Why is there water leaking under the bottom track or bottom pivot bracket for my Contemporary Pivot Door?
NEED MORE HELP?
CONTACT SUPPORT.