COMMONLY ASKED QUESTIONS:

Q: How do I adjust the swinging panel on the Wilder Shower Door System?

A: First, make sure your space measures between 30 and 36 inches (76.2 cm and 91.4 cm) wide, as noted on the instruction guide cover.

Steps 35-37 in the Wilder installation guide will give you step-by-step instructions for adjusting the Pivot Door position within the Top and Bottom Pivot Brackets.

Q: What are the required enclosure dimensions for installing this door?

A: Before installing the Wilder glass shower door, ensure your space meets all the requirements shown on the installation guide cover.

Additionally, make sure both side walls are no more than 3/8" out of plumb (vertical alignment).

This is the maximum adjustment the system allows. Installing outside of this requirement may affect how the door works and will void the warranty.

Q: What if my enclosure wall doesn’t have studs or they’re in the wrong place?

A: Studs are required on both sides for the Wilder Shower Door System. Refer to Page 2 of the Wilder installation guide for the correct position for installation.

If studs are missing or misaligned, stop installation and contact the Customer Experience Team.

Q: Can I use the door without the fixed panel?

A: No. The Wilder door is designed to work only with the fixed panel and isn’t intended for customization. For performance and safety, adhering to the installation guide’s step-by-step instructions is imperative.